Theory of Operation Swing Motor Crossover Relief Valve —The swing motor crossover relief valves are direct acting relief valves with a shock reducing function. The piston (17) allows the spring force on the poppet (23) to be reduced. Additionally, as oil flows through the orifice (153) and moves the piston, a pressure difference is created from one side of the poppet to the other. The reduced spring force and the pressure difference on the poppet allow the poppet to open below set pressure to reduce pressure spikes. As the piston moves, spring force on the poppet is increased.
Once the piston reaches full stroke, the pressure difference is eliminated and the pressure in the swing circuit will reach set pressure. Swing Motor Make-Up Check Valve —When the swing control lever is returned to the neutral position while the upperstructure is in motion, the weight of the upperstructure will continue to turn the swing motor which causes it to act like a pump. The flow caused by the pumping action of the swing motor cannot flow through the control valve because the work ports are blocked by the valve spool. The high pressure oil is forced through the crossover relief valve.
The make-up check valve (151) provides oil to the low pressure side of the swing motor to prevent cavitation. MM61211,0001539 –19–26APR06–4/4 9025 05 ,102 TM2361 (24JUN08) 9025-05-102 450DLC Excavator Operation and Tests 062608 PN=740