Theory of Operation Counterweight Removal Cylinder Operation T6919BQ –19–07APR89 A—Wiper Seal E—U-Cup Seals H—Barrel K—rod B—Rod Guide F—Nut I—Retainer L—Counterweight Removal C—U-Cup Seal G—Piston J—Bushing Cylinder D—Wear Rings 9025 05 ,110 The counterweight removal cylinder has a threaded rod guide (B). An O-ring seal between the cylinder barrel (H) and the rod guide. Bushing (J) is held in the rod guide by a U-cup seal (C) and a retaining ring. The wiper seal (A) cleans the rod (K) when the cylinder is retracting. The piston (G) and retainers (I) are held on the rod by a nut (F). The piston has two wear rings (D) and two U-cup seals (E).
OUT3035,0000022 –19–25APR06–1/1 TM2361 (24JUN08) 9025-05-110 450DLC Excavator Operation and Tests 062608 PN=748