TM2361 (24JUN08) 9025-15-34 450DLC Excavator Operation and Tests 062608 PN=784 Diagnostic Information 2 Pilot Valve Check Check combined function swing speed. Is swing speed still slow or inoperative? YES: Inspect and repair swing pilot valve. See Pilot Signal Manifold Operation. (Group 9025-05.) NO: Diagnostic procedure complete. – – –1/1 3 Park Brake Release Pressure Check 1 2 TX1006370 –UN–17APR06 1—Signal Pilot Manifold 2—To Swing Park Brake Remove park brake hose and install pressure gauge in port (2). Measure parking brake release pressure while holding arm function over relief. Is pressure between 3.4—4.9 MPa? YES: Go to Swing Motor Parking Brake Check. NO:
Repair or replace swing park brake release valve in signal control valve. See Pilot Signal Manifold Disassemble and Assemble. (Group 3360.) – – –1/1 9025 15 34 4 Swing Motor Parking Brake Check Inspect swing motor parking brake release valve. Is valve bound or scored? YES: Repair or replace release valve. See Swing Motor and Park Brake Disassemble. (Group 4360.) NO: Go to Circuit Relief Check. – – –1/1