. OPERATION EXPLANATION OF COMPONENTS ACCELERATOR PEDAL speed. STEERING TILT LOCK LEVER WARNING NOTICE Do not operate the lever (1) continuously by excessive force. The lever (1) may become loose or get out of angle. In this case, please ask your Komatsu distributor to carry out repairs. The bolts (2) and (3) on steering column are the left-hand screw. If they are screwed counterclockwise, it is not a loosening direction but a tightening direction (A). 3 - 55 This pedal ( 8) controls the engine speed and output The engine speed can be f reely controlled between low idle and full Stop the mac hine before adju sting the tilt of th e steering wheel.
If this operation (adjustment) is carried out while the machine is moving, it ma y lead to a serio us accident or p ersonal injury. This lever i s used t o unlo ck and loc k th e steering colum n when adjusting th e position of th e steering column to the front or rear or up o r down. er up, set the steering wheel to the desired position, Pull the lev position, then he lever down to lock the steering column securely in of adjustment is as follows. The amount of adjustmen t is as steering the down the steerin olumn securely Up-down movemen When at t 0 mm (0 i When moved up to n) 40 mm (1.6 in) Tilt amoun 0 - 105 m t (0 - 4.1 in m 0 - 130 mm ) (0 - 5.1 in)