. OPERATION OPERATION USING SWITCH TO CHANGE BETWEEN FORWARD AND REVERSE (If equipped) WARNING 1. Place the directional lever at the N position. 2. Turn on directionalselector switch on the right side of switching panel that enables directional selection. Position (a): ON Position (b): OFF The two pilot lamps light up, i.e. one is the pilot lamp built in the actuating switch and another is the directional selector pilot lamp on the machine monitor. Then the actuating switch enables the forward - reverse shifting to function.
3 - 118 WHEN USING AUTO-SHIFT If an attempt is made to switch the direction between forward and reverse when the auto-shift is ON, normally, the gearshift range will switch F3 -> R2, F4 -> R2, or R3 -> F2, R4 -> F2 to make it possible to move the machine off quickly. However, if an attempt is made to shift between forward and reverse when the machine is traveling at high speed such as shown in ranges I or II in the chart on the right, the sound. At the same time, "E00 PARKING BRAKE" is displayed on t central warning lamp will light up and the buzzer will he character display.
If the alarm buzzer sounds, depress the brake immediately to reduce the travel speed, then operate the directional lever to switch between forward and reverse. In particular, if it is attempted to switch between forward and r everse in range II, the gear range will not shift to 2nd, but will switch F3 -> R3, F4 -> R4, or R3 -> F3, R4 -> F4. As a result, the reduction in travel speed will be less than in range I, so care is necessary.
When the directional selector switch actuation switch is at the ON position, if the directional lever is operated to F or R, the machine will travel in forward or reverse according to the operatio n of the directional lever, regardless of the position of the lever. ul when operating. rm buzzer sounds. e of the work equipment control lever to the N position. directional selector switch at the side of the work equipment control Priority is given to the operation of the directional lever, so be caref When this is done, the central warning lamp lights up and the ala Set the directional lever and directional selector switch at the sid