. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE filler port (F). REMARK Differential), the brand of lbft) CLEAN AXLE CASE BREATHER WARNING 4 - 27 3. Set the oi l level gauge (G) as shown 4. The oil lev el is correct when it is betwe en the two lines provided on the oil level gauge. If the oil le For lubricating oil is different. Use the specifi 5. through d rain plug (P) and check the 6. If the oil le vel is correct, install plug ( Tightenin g torque:
127 to 177 Nm (13 to 18 kgm, 94.0 to 130.2 When cleaning the axle breather, apply the pa rking brake and secure the front and rear frames with Remove all m ud and dirt from around the breather with a brus After removin g the mud or dirt from arou the breather, immerse it in cleaning fluid When cleanin (front and rea After removin g the breather, take steps to prevent dirt or dust fr om entering the m