. OPERATION EXPLANATION OF COMPONENTS display "TEL". switch 1. It will Once the telephone number is input, the input number will be displayed next time. 4. Up to 12 digits can be displayed for the telephone number. 3 - 33 INPUT METHOD FOR TELEPHONE NUMBER I t is possible to disp lay the telephone numb er on the right side of "CALL" displayed o n the c haracte r display when action code "E03" i 1. Press the () o f monitor panel mode s elector switch 1, and display t he odomete 2. Press (>) or ( 3. change to the d isplay in the diagram on Input from the f The cursor is di splayed at the input posi tion. Press (>) or ( monitor panel m ode selector switch 2 a nd display "0 to 9".
To leave a blank, s When the input mode selector position. 5. Repeat the pro e last digit. At the last digit, p ress ( ) of monito r panel mode se lector switch 1 to retu rn to the previous scree If there is a mis take in the input or the i nput is to be st opped, press ( ) of monito r panel mode selector s witch 1 to return to th e previous screen. 6. When completi switch OFF.