. OPERATION EXPLANATION OF COMPONENTS Position (a): (OFF) Stop Position (b): (INT) Intermittent wiper Position (c): Low-speed wiper Position (d): High-speed wiper REAR WIPER SWITCH When lever (C) of this switch (17) is turned, the rear wiper will move. Position (a): Washer liquid is sprayed out 3 - 44 HOLD SWITCH To fix the speed range when traveling in automatic transmission, To fi pres s switch (15) at the side of the lift arm control lever knob. The transmission will be fix ed in the speed range displayed on shift hine monitor and shift hold pilot lamp (B) sed again, the display goes out. splayed on shift indicator (A) on the mac will light up.
lamp will l Whe n the switch is pres sed again, the display go Use this function to sele ct the desired speed rang e when traveling up o r down hills or when carrying out operations such as grading. REMARK When the torque c onverter is in the lock-up condition (if mission cannot be fixed. shift hold, operate the directional lever or W e quipped), the trans mission cannot be fixed. W hen canceling the shift hold, operate the di rectional g s tu earshift lever or ope rate the transmission sh ift mode selector witch to MANUAL. I t is also possible to cance l the hol d shi ft by rning the starting s witch OFF.
FRONT WIPER SWITCH Whe n rotary switch (A) o f this switch (16) is turne d, the front w iper will move. If pu sh button (B) is pres sed, washer liquid will be sprayed out onto the f ront glass while the button is being pressed. Position (b): OFF Position (c): Wiper is op Position (d): Washer liq uid is sprayed out, wiper i