MACHINE OPERATIONS AND CONTROLS 3.3.4.3 MOVING MACHINE BACKWARD 1. Set safety lock lever (2) to the FREE position, then raise the work equipment 40 to 50 cm (1.6 to 2.0 in) from the ground. 2. Raise the blade. 3. Opearate the both travel levers (3) as explained below. When the sprocket (A) is at the rear of the machine. Pull levers (3) backward slowly to move the machine off. When the sprocket (A) is at the front of the machine. Push levers (3) forward slowly to move the machine off. 4. Switch the travel speed as follows. When the travel speed selector switch (4) is pressed, the travel speed can be switched between high speed and low speed.
Each time the switch is pressed, the travel speed is switched between low speed and high speed. When the machine is traveling at high speed, travel speed boost monitor (5) lights up. For details of the travel speed values, see Section "5.1 SPECIFICATIONS". 111