TRANSPORTATION UNLOADING 1. Load and unload on firm level ground only. Maintain a safe distance from the edge of a road. 2. Properly apply the brakes on the trailer and put blocks un- der the tires to ensure that the trailer does not move. Make the slope of the ramps a maximum of 15°. 3. Remove the chains and wire ropes fastening the machine. Ramp 4. Start the engine. Warm the engine up fully. Blocks Distance between ramps Max15 Block RYA00670 5. Check that the travel speed boost monitor is off. If the monitor is on, the speed is set to high speed travel, so press the travel speed selector switch. The monitor goes out and the speed is shifted to low speed travel. 6.
Set the safety lock lever to the FREE position. Machine equipped with canopy Machine equipped with cab NOTE For machines equipped with a cab, there is only a safety lock lever on the left. 138