DETAILED CONTROLS AND GAUGES 7. Pedal Lock (For boom swing contol pedal) boom with the pedal lock. If the operation pedal is acci- dentally pressed while it is not lock, a serious accident or injury. This pedal (7) is used to lock the boom swing pedal. The pedal is locked by fitting the plate over the pedal. (F): Free (L): Lock 8. Boom Swing Control Pedal This pedal (8) swings the boom to the left and right. (a): Right swing (b): Left swing N (Neutral): Boom is stopped and held in this position. 9. Floor Lock Cancel Lever Always observe the warning and caution items when opening or closing the floor. If the operation is car- ried out mistakenly, it may lead to serious personal injury.
Do not open or close the floor on slopes. Do not open or close the floor when there is a strong wind. When opening or closing the floor, pull this lever (9) to FREE (F) position to release the lock. Open or close the floor while pulling this lever (9). After opening or closing the floor, release lever (9). It will re- turn automatically to LOCK position (L). (F): Free (L): Lock When opening (tilting) the cab or floor, see "3.2.12 METHOD OF OPENING (TILTING) FLOOR" for details. 72 WARNING WARNING