D 2008/2009 Cylinder head W 01-04-04 z Lift the cylinder head carefully from the crankcase. z Remove gasket. z Clean sealing surfaces. Do not place cylinder head on sealing sur- face. 6 © 41009-1 Installing the cylinder head 1 z Measure piston projection. W 01-04-09 Note installation position of the hydro tap- pets. Make sure the clamping bushings (1) are in place. 1 © 41010-0 z Fit a new cylinder head gasket. The sealing surfaces for the cylinder head gasket must be clean and free of oil. Label OBEN / TOP facing the cylinder head. © 41011-1 © 02/2006 5992-001 3/6