D 2008/2009 Drive system W 02-04-01 z Unscrew screws (1). z Lever out main bearing housing (2) with a suitable tool in the recess clearances. Make sure that the thrust washer halves do not fall into the crankcase. z Visually inspect the components. 6 2 1 © 41034-1 z Unscrew screw (1). z Remove oil suction pipe (2). 3 1 z Unscrew fixing screws (3). z Remove oil pressure regulating valve (4). W 08-11-10 2 4 © 41059-0 z Remove crankshaft. z Visually inspect the components. © 41035-0 © 02/2006 6001-001 3/10