When the engine is running, the electric power steering system fault warning light wheel hits the bottom quickly). Carry out the EPS self-learning according to the following steps to restore the function: 1. Start the engine. 2. In the parking state, turn the steering wheel from the middle position to the left for 1 second, then to the right for 1 second, and then to the middle position; 3. Driving in a straight line at a speed greater than 30 km / h over 300 m; 4. Stop and stop the engine, restart the engine, complete EPS selflearning, and turn off the ESP fault light. n case of steering system failure, please contact BAIC dealer immediately for inspection and maintenance.
Even i fyou dont' ef el any difference in the ste erring process, there may be serious problems n i het system , leading to steering failure and other situations. ●After the steering column and steering gear are replaced or the vehicle's ourf-wheel alignment is completed again, the EPS angle needs to be calibrated in the middle position, otherwise the vehicle will deviate and the erturn function will fail. Warning is always on, indicating that the electric power steering system is not working properly. Please contact the authorized BAIC dealer to check the electric power steering system. EPS self learning The battery is disconnected for a long time, and the ESP system fault light is on .
After reconnecting the power supply, the EPS will lose the active return function (which can improve the return performance of the steering wheel) and the soft stop function (which can reduce the impact feeling when the steering 147