Stand by The keyless start / stop button is in the "run" Execution When AVH is in standby state, the gear is in "d" or "R", and the brake pedal is pressed during driving. When the vehicle stops stably, AVH will enter the execution state, that is to say, it will automatically maintain the parking state. At this time, the automatic parking switch indicator ① remains on, and the automatic parking indicator on the instrument cluster Danger the brake pedal is not pressed, push down on the electric park switch, the electric park will not release.
The instrument cluster display indicates "please apply the brake to release the electric park" ●After the automatic stop is stable, the electronic Park shall be applied first, and then the shift lever shall be placed in the "P" position. some special cases, if the electronic parking brake is not required for parking, push down the electronic parking switch before turning off the start / stop button, keep it for more than 3 seconds and turn off the vehicle power at the same time, the vehicle will not apply the parking brake. ●Make sure that the driver's safety belt is fastened, or the electronic parking auto release function cannot be realized.
Warning ●When in the parking state, do not press the accelerator pedal quickly, otherwise the electronic parking life will be reduced. The electronic parking auto release function will reduce the service life of the parking system. It is recommended to use it only when starting on a ramp. is on. Automatic relief In the AVH execution state, the gear is in the "d" or "R" gear. Press the accelerator pedal, and AVH will be released automatically, and the parking state will be released automatically. At this time, the automatic parking switch indicator ① remains on, and the automatic parking indicator on the instrument cluster goes out.
152 lose all doors, fasten the driver's safety belt, pres s the automatic parking switch $, and the automatic parking function is on standby . At this time , the a utomatic park s witch indica