AVM system open condition 5. Press the start/stop button to "OFF" or "ACC" mode. Note: when entering by opening condition 2, it cannot be closed by quit condition 1.VM The vehicle is in the "R" , the default screen is rearview + panorama, in which dynamic and static auxiliary lines are integrated. When the steering wheel is not rotating, the dynamic track line coincides with the static track line.When rotating the steering wheel, the dynamic auxiliary line will calculate the vehicle trajectory line according to the steering wheel Angle to assist the driver to park. When the start/stop button is in "RUN" mode, it can be opened with any of the following conditions: 1. Shift to R 2.
vehicle speed is less than 15km/h, press the AVM switch system interface switch off AVM system quit contion When AVM is opened, the system can be quit if any of the following conditions are met: 1.Shift to "P" (MT model is in neutral) for 5 seconds; 2.Press the "exit" button on the left side of the display screen when not under "R"; 3.Non-" R "gear, the vehicle speed is above 15km/h; 4.Non R gear, Press down the AVM switch When the system starts up, the default screen of the system is front view + panorama, which can be switched to other views through shifting gear, turning light or touch screen operation. 167