Wheels transposition Danger The purpose of regular wheel transposition is to make all the tires are worn evenly, thus extending the overall life of tires. Implement wheel transposition after driving every about 10,000km. Before wheel transposition, you should check the tire and wheel for damages, and continue wheel transposition and wheel alignment if there is no damage. ●Dirt on the joint surface between wheel and brake disc may cause wheel bolts loosening, causing the wheel to fall off and traffic accidents .
Therefore, when replacing the wheels, the corrosion or dirt on the joint surface between the wheel and the brake disc should be cleaned Wheel balance inspection Warning Wheel dynamic balancing has been carried out for the vehicle in the factory, but many factors will affect the wheel balancing in the use course of the vehicle. Dynamic wheel imbalance can lead to wheel wobble and abnormal tire wear during operation, thus affecting vehicle stability. Therefore, you should regularly check the vehicle BAIC dealership for wheel balancing inspection. During wheel transposition, the front wheel should maintain a better state.
●If one tire is worn unevenly or excessively, you should go to the authorized dealer of BAIC for wheel alignment. During wheel transposition, wheel transposition shall be carried out in diagonal manner. Spare wheel does not participate in transposition. After transposition of rear wheels, ensure all the wheel bolts are tightened to 110±10N·m.And adjust pressure of all tires to the specified value. After traveling 1000km, check the wheel bolts tightening situation again. 211