Foot mat Anti-corrosion measures Anti-freezing agent and snow-melting agent used on road are corrosive, and they will accelerate corrosion and aging of underbody parts such as the exhaust system, parking brake cable, brake pipelines, bottom plate and the fenders. Therefore, after traveling on such roads, you should clean the bottom of the vehicle timely. Other rust-proof and anticorrosion measures may have special requirements in some regions, please consult with the authorized BAIC dealer . Whatever foot pad is used, you should confirm it is suitable to the vehicle, and it is reliably and properly fixed, so as not to interfere with the pedal.
Ensure vehicle be free of corrosion ●Regularly clean and wax the vehicle to keep it clean. ●Always check whether there is minor paint damage and make repairs as soon as possible. Check the vehicle bot tom for accumulation of sand, dirt, or salt, and wash with water as soon as possible if so. you use non-fixed foot pad, after sliding it may hinder the operation of the brake pedal and the accelerator pedal, causing serious accidents. Warning Warning is prohibited to remove dirt, sand or other debris by washing the passenger compartment with water, but rather with a vacuum cleaner or broom. not allow water or other liquids to contact with the electrical components inside the vehicle.
Otherwise, it will damage the electrical components. Most common factors for vehicle corrosion ●Moist dirt or debris accumulates in the body sheet metal cavity or other parts. ●Sand and small stones or small accidents cause damages to paint surface or other protective layer. 219