Danger ●Please keep the wheel bolts and the thread on rim clean, and make sure no oil stain. Please correctly tighten up the ●wheel bolts in accordance with the specified tightening torque, otherwise when the vehicle is running, the bolts may get loosened and thus traffic accident may occur. ●Tighten the wheel bolts with the wheel bolt dismantling wrench provided with the vehicle, but you cannot confirm the torque. Reasonably control the traveling speed, avoid sharp acceleration and emergency braking, and go to the authorized dealer of BAIC as soon as possible to check and ensure the predetermined torque is reached. 2.
Mount all wheel fixing bolts, first tighten them with hand as far as possible, and then push the wheel inward, and then see if you can tighten them further, to confirm wheels are fully fixed. 3. Rotate jack handle counterclockwise, 4.and lower the vehicle. 4. Tighten the wheel fixing bolts clockwise with the wheel bolt wrench, do not use any other tool, such as a hammer and a pipe barrel, and ensure that the wrench completely entangle the bolt. 5. Tighten the wheel fixing bolts in the diagonal sequence as shown in ① to ⑤ .The predetermined torque is 110 ±10N·m 229