Panoramic sunroof * Panoramic sunroof sliding open/close Sunroof Anti-clip Function* Panoramic sunroof switch The start/stop button is in "RUN" mode. The sunroof knob switch is rotated to gear 3, gear 4, gear 5 and gear 6, and the sunroof automatically slides to the corresponding position of the switch gear. Turn the sunroof knob switch to gear 7 and slide the sunroof to full open position. If the glass moves from gear 6 to gear 7, the release switch bounces back from gear 7 to gear 6, the movement stops immediately and will not move to gear 6 again. When the glass moves to gear 7, release the switch from gear 7 to gear 6 without triggering new movement. The start/stop button is in RUN mode.
Turn the sunroof knob switch to gear 1 and automatically close the sunroof. Anti-clip function can prevent large items from clipping when the sunroof is closed. When closing the sunroof, if the movement of the sunroof is blocked, the sunroof will stop closing and then slightly open. When the sunroof is closed, if the anti-clip function is triggered, the sunroof will move in the open direction for a certain distance and stop moving. Warning ●Sunroof anti-clip function can not prevent finger clipping. 89 When the start/stop button is in "RUN" mode, the sunroof ca n be opene d or closed by panora mic sunroo f switch.
The sunro of switch has two b uttons and knob switc hes, one i s the sun sh ade closing button , the o ther is the sun shade opening b utton and the other is the sunroof kn ob switch. The open ing and closing of the shade curtain ca n be realized by op erating two buttons, and the opening, c losing and warping of the sunr oof can be realized by selecting 7 corresponding gears (as shown in the left picture) by operating the sunroof knob switc