. OPERATION MACHINE OPERATIONS AND CONTROLS Seat Belt WARNING replace the seat belt. the back of the belt. 3 - 75 Before fitting the seat belt, check that th ere is no problem in t he belt mount bracket or mounting be lt. If it is worn or damaged, Even if no pro blem can be seen i n the b elt, replac e the seat b elt ever y 3 y ears. The date of manufac ture of the belt is shown on Always wear t he seat belt during operations. Fit the seat be lt so that it is not t wisted. Fastening and This seat belt h as a wind-in device, s o it is not necessar y to adjus Fastening Seat B elt Hold grip (2) an d pull the belt out from wind-in d evice (1), c heck t hat the belt is no securely.
When doing th locked. t twisted, then insert tongue (3) into buckle (4) is, pull the belt lightly to check that it is properly (4) Removing Belt ) in buckle (4), and remove tongue (3) from buckle (4). Press button (5 ) in buckle (4), a nd re move tongue (3) fro m buckle The belt is auto matically wound in, ho ld grip (2 ) an d retu rn the bel t slowly to wind-in devic REMARK For machines with a suspension seat,adjust the position of the at,adjust positi the seat, then adju st tether belt (1) . Insta ll the tether b elt so that i t is tensed when n o one is sitting in t he se at. (Only machines equipped with suspensio n seat)