Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINE OF SERVICE analyzer to other metal wear measure the quantity of iron particles of 5 µ or more, enabling early detection of failures. 4 - 5 The nipples not included in the MAINTENANC E section are nip ples used wh en overhaulin g, so they do not need grease. If any part bec omes stiff or generates noise after being used for a long time, grease it. f all of the old grease that is pushed out when greasing. omes stiff or generates noise af ter being used f or a long tim Always wipe of f all of the old grease that is pu shed out when g reasing.

Be particularly wear of the rot careful to wipe off the old greas e in places whe re sand or dir t sticking in the grease wou ld cause ating parts. Carrying Out KOWA (Komatsu Oil Wear A nalysis) KOWA is a mainte nance service that makes it po ssible to prevent machine fail ures and downt ime. With KO WA, the oil is periodically s ampled and analyzed. This en ables early detection of wear of the machine drive parts a nd other problems. We strongly reco mmend you to use this service. The oil analysis i s carried out at actual cost, so the cost is low, and the results of the analysis are reported together w ith recommendations which will reduce rep air costs and machine downtime.

KOWA Analysis It ems Measurement of density of metal wear particle This uses an measure the d particles in the ICP (Inductively Coupled Plas ensity of iron, copper, and o oil. Measurement of quantity of particles ment machine t rticle quantifier index measure Others Measurements fuel in the oil, a are made of items such as the ratio of water in the oil, den sity of the antifr eeze coolant , ratio of nd dynamic viscosity, enabling a highly precise diagnosis o f the machine's health. Oil Sampling val ine er components en sampling hat the oil is well mixed before sampling. mpling at regular fixed intervals. Sampling inter 250 hours: Eng 500 hours:

Oth Precautions wh Make sure t Perform sa Do not perfo hat the oil is well mixed before mpling at regular fixed intervals. rm sampling on rainy or windy days when wate r or dust can get into the oi For further details of KOWA, please contact your Komatsu distributor.