. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT above procedure. Precautions when using 6 - 21 The deterior ation of the hydraulic oil when using th e breaker is much faste r than for normal operations, so reduc maintenanc e interval for the hydra For detail s, see "MAINTEN HYDRAULI C BREAKER (PAGE 4 When Using General Attachment Such as Crusher When the A mo de or E mode control switch is ON and the lo ck pin position makes both the front and the rear of the peda l free, if the fron t or rear of t he pedal is depressed , the attachment is actuated. 1. Set the wor king mode to A mode or E mode. onitor is pressed, the screen 2.
When sele ct switch (1) on the m onitor is pressed, creen changes to screen (C), so press up switch (3) or d own s witch (4) to move the bar graph showing the oil flow up or down , then press input confirmation switch (2 ). ow (approx. 430 liters/min). The def ault setting is the full fl ow (approx. 430 liters/min) Even if the starting switch is turned OFF, the set o il flow e engine is next starte d will be the valu e set by the Check t hat the stop valve is at Check t hat the working mode For deta ils of the path of the oil, see "HYDRAULIC CIRCUIT (PAGE For othe 6-14)". r precautions when handling the attachment, follow the instr and use uction manual from t he attachment manufacturer tly.
anufacturer the attachment correc