UNDERCARRIAGE / Track Adjuster Assemble Track Adjuster CAUTION: Cylinder (5) weight: The cylinder (5) assembly weight: 47 kg (105 lb) 1. Install rod (6) to cylinder (5). Install U-ring (4) and dust seal (3) to cylinder (5). Apply grease to the inner surface of U-ring (4) and dust seal (3). Fill position (A) in cylinder (5) with grease. 2. Push holder (1) into piston rod (2). 3. Install the piston rod (2) assembly to cylinder (5). Release any pressure in position A and rod (6) completely. 4. Install spacer (8) to the rod (6) assembly. CAUTION: The spring (7) assembly weight: 183 kg (405 lb) 7. Hoist and place the spring (7) assembly on special tool (ST 4932).
Remove eyebolt from piston rod (4). ST 4932 CAUTION: Spring (7) weight: 104 kg (230 lb) 5. Install spring (7) on rod (6). 6. Install eyebolt (M16, Pitch 1.5 mm) to rod (6). W142-03-04-005 8. Install washer (9) to rod (6). W3-4-7