OPERATING THE MACHINE OPERATING THE MACHINE CONTROL LEVER (ISO PATTERN) WARNING: Never place any part of body beyond win- dow frame. It could be crushed by the boom if boom control lever is accidentally bumped or otherwise engaged. If window is missing or broken, replace im- mediately. Prevent possible injury from unexpected machine movement. Make sure you know the location and function of each control before operating. 1 5 4 3 7 8 2 6 The machine is equipped with a label showing the control pat- terns of the levers and pedals. IMPORTANT: When digging, avoid hitting tracks with boom cylinders.
When digging over the end of the tracks, travel motors should be at the rear to maxi- mize machine stability and lift capacity. When a lever is released, it will automatically return to neutral, and that machine function will stop. M1J1-01-022 3 1- Arm Roll-Out 1 2- Arm Roll-In 3- Swing Right 4 4- Swing Left 2 5- Boom Lower 6- Boom Raise 7- Bucket Roll-In. 8- Bucket Roll-Out. M104-05-001 6 5 8 7 M104-05-002 5-1