OPERATOR'S STATION Screen Display when Maintenance Information Display is ON When only one item displays 1. If turning the key switch to the ON position, the starting screen displays. Then, the scheduled maintenance screen for the item whose change interval has expired displays for three to ten seconds. Finally the basic screen displays. (In the right example, Hydraulic Oil applies.) NOTE: For a machine which the basic screen is displayed ac- cording to a password on , the scheduled maintenance screen for the item whose change interval has expired displays for three to ten seconds, after the password is input successfully and the determination key is pushed.
And then the basic screen displays. Starting Screen T1V1-05-01-115 2. If data is rest, push the reset key while the scheduled maintenance screen is displayed. The message “Reset Data. OK?” displays. Then, push the determination key. The value of remaining hours is reset to that of change Interval. Previous change date/hour is updated with cur- rent date and time. Back Key Reset Key NOTE: When pushing the back key while the maintenance information display screen is displayed, return to the basic screen. Maintenance Infomation Display Screen T1V5-05-01-170 NOTE: When pushing the back key while reset screen is dis- played, return to the maintenance information display screen.
Back Key Determination Key Reset Screen T1V5-05-01-171 Basic Screen T1V1-05-01-123 1-40