12.OPERATION 12.8 OPERATION OF WORK EQUIPMENT WARNING If any lever is operated when in the deceleration range, the en- gine speed will suddenly increase, so be careful when operating the levers. The work equipment is operated by the left and right work equipment control levers. The left work equipment control lever operates the arm and swing, and the right work equipment control lever operates the boom and bucket. The movements of the lever and work equipment are as shown in the diagrams on the right. When the levers are released, they automatically return to the neutral position and the work equipment is held in place.
If the work equipment control lever is returned to the neutral position when the machine is stopped, even if the fuel control dial is set to FULL, the auto-deceleration mechanism will act to reduce the engine speed to a mid-range speed. PC130/150LGP-6K ENG 2-64