24. SERVICE PROCEDURE 24.2.3 CHECK AND TIGHTEN TRACK SHOE BOLTS (MACHINE EQUIPPED WITH METAL SHOES) If the machine is used with track shoe bolts (1) loose, they will break, so tighten anyu loose bolts immediately. Mehtod for tightening 1. First tighten to a tightening torque of 196 ± 20 Nm (20 ± 2 kgm) then check that the nut and shoe are in close contact with the link contact surface. 2. After checking, tighten a further 120° ± 10°. Order for tightening Tighten the bolts in the order shown in the diagram on the right. After tightening, check that the nut and shoe are in close contact with the link mating surface. PC130/150LGP-6K ENG 3-31