24. SERVICE PROCEDURE 24.3.3 CHECK FUEL LEVEL, ADD FUEL WARNING When adding fuel, never let the fuel overflow. This may cause a fire. If spilling fuel, thoroughly clean up any spillage. 1. Open the pump room door on the right side of the machine and use sight gauge on the rear face of the fuel tank to check that the tank is full. 2. If the fuel level is not within the sight gauge, add fuel through filler port while watching sight gauge . Fuel capacity 240 liters NOTICE For details of the fuel to use, see "20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE". 3. After adding fuel, tighten the cap securely.
REMARK If breather hole on the cap is clogged, the pressure in the tank will drop and fuel will not flow. Clean the hole from time to time. PC130/150LGP-6K ENG 3-42