28. MACHINES READY FOR ATTACHMENTS 28.3 LONG TERM STORAGE If the machine is not to be used for a long time, do as follows. Set the stop valve in the lock condition. Install a blind plug to the valve. Set the selector valve to the position for general attachments such as the crusher. Set the lock pin at the LOCK position. If there is no breaker or general attachment installed, operating the pedal may cause overheating. 28.4 SPECIFICATIONS Hydraulic specifications Oil flow Cracking pressure of safety valve When using breaker: 17200 kPa (175 kg/cm 2 ) When using other attachment:
24500 kPa (250 kg/cm 2 ) PC130/150LPG-6K ENG 5-9 Position of lock pin Working mode Heavy-duty operation Breaker 200 l/min 44.0 (52.8 USgal/min, UKgal/min) 120 l/min 26.4 (31.7 USgal/min, UKgal/min) 44.0 26.4 100 l/min (26.4 USgal/min, 22.0 UKgal/min) (26.4 USgal/min, UKgal/min) _ 22.0