MACHINE OPERATIONS AND CONTROLS OPERATION Adjustment 3 Seat Adjustment When adjusting the position of the operator's seat, always set the safety lock lever to the LOCK position to prevent any accidental contact with the control levers. q Always adjust the operator's seat before starting each operation or when the operators change shift. q Adjust the seat so that the control levers and switchis can be operated freely and easily with the operator back against the backrest. (A) Fore-and-aft adjustment Pull lever (1) up, set the seat to the desired position, then release the lever. Fore-and-aft adjustment:
160 mm (16 stages) (B) Adjusting reclining NOTICE The seat can be reclined to a large angle when the seat is pushed fully forward, but the reclining angle is reduced when the seat is moved back, so when moving the seat to the rear, return the seat back to its original position. Pull up lever (2) and set the seat back to a position which is comfortable for operation, then release the lever. A Sit with your back against the seat back when adjusting. If your back is not touching the seat back, the seat back may suddenly move forward. (C) Adjusting seat tilt q Forward tilt Push lever (3) up to adjust the angle of the front of the seat.
(4 stages) q To raise the angle at the front of the seat, keep the lever pushed up and apply your weight to the rear of the seat. q To lower the angle at the front of the seat, keep the lever pushed up and apply your weight to the front of the seat. q Rear tilt 3-64 WARNING