OPERATION MACHINE OPERATIONS AND CONTROLS Mirror (B) Adjust thhe mirror mount so that it is possiblle to see people at the rear right of the machine. q Install the view mirror in the location indicated in the figure at the right. (M): 170mm q If the side view mirror does not move smoothly when adjusting is angle, loosen mirror securing bolt (3) and mir- ror securing stay bolt (4). Tightening torque of bolt (3): 4.0-5.4 Nm (0.41-0.55 kgf-m) q When adjusting the side view mirror angle, make and adjustment so that the side of the machine comes into view on the mirror as shown in the figure at the right.
Mirrors (C), (D), (E) Adjust the side view mirrors so that people around 1m away from the machine can be seen. (W): 1 M q If side view mirror (C) does not move smoothly when adjusting its angle, loosen mirror securing screw (5). Tightening torque of screw (5): 0.98-1.47 Nm (0.10-0.15 kgf-m) 3-67