OPERATION MACHINE OPERATIONS AND CONTROLS 3. Hold the key in starting switch (3) at the HEAT position (D), and check that preheating monitor (4) lights up. After about 30 seconds, preheating monitor lamp (4) will flash to indi- cate that preheating is finished. (The flashing will stop after approx. 10 seconds.) REMARK The monitors and gauges will light up also when the key is turned to the HEAT position, but this is not an abnormality. If the temperature is low, the monitor screen may become dark or it may take time for the display to appear, but this is not an abnormality. 4.
When preheating monitor (4) flashes, turn the key in start- ing switch (3) to the START position (C) to start the engine. 5. After the engine starts, release the key in starting switch (3). The key will automatically return to the ON position (B). 6. After starting the engine, do not touch the work equipment control lever or travel pedal while the engine oil pressure monitor lamp is lighted up. 3-75