OPERATION DETAILED CONTROLS AND GAUGES SWITCHES 3 A (1) Starting switch (8) Knob switch (2) Fuel control dial (9) Room lamp switch (3) Cigarette lighter (10) Pump drive Emergency switch (4) Swing lock switch (11) Swing holding brake release switch (5) Lamp switch (12) Rotating lamp switch (if equipped) (6) Alarm buzzer stop switch (13) Heated operator seat switch (if equipped) (7) Horn switch (14) Lower wiper switch (if equipped) Starting Switch This switch (1) is used to start or stop the engine. (A): OFF position The key can be inserted or withdrawn. The switches for the electric system except the room lamp, are all turned off and the engine is stopped. (B):
ON position Electric current flows in the charging and lamp circuits. Keep the starting switch key at the ON position while the engine is running. (C): START position This is the engine-start position. Keep the key at this position during cranking. Immediately after starting the engine, release the key. It will automatically return to the ON position (B). 3-17