4.8 Service procedure Maintenance Every 2000 hours service Change axle oil z When changing the oil, apply the parking brake and secure the front and rear frames with the safety bar. z After the engine is stopped, the parts and oil are at high temperature, and may cause burns. Wait for the temper- ature to go down before starting the operation. z When the plug is removed, oil may spurt out, so turn it slowly to release the internal pressure, then remove it carefully. z Refill capacity Front: 14.0 liters (3.70 US gal) Rear: 14.5 liters (3.83 US gal) z A: Front z B: Rear 1. Set a container to catch the oil under drain plug (P). 2. Remove plug (1), then remove drain plug (P) to drain the oil.
1 REMARK Remove the mud and dirt from around plug (1), then remove the plug. P GK032251 3. After draining the oil, clean drain plug (P) and install it again. Tightening torque: 127 to 177 N·m (13 to 18 kgf·m, 94.0 to 130.2 lbft) 1 4. Add axle oil through plug hole (1) at the refill level. P GK032252 REMARK For axles with ASD (Limited-Slip Differential), the brand of lubricating oil is different, so always use the specified lubri- cating oil. 5. After adding oil, check that the oil is at the specified level. For details, see "Check axle oil level, add oil (4-30)". REMARK For operations where the brake is used frequently, change the axle oil at shorter intervals.
WA150-5H – VEAM934100 4-63 WARNING WARNING