. OPERATION MACHINE OPERATIONS AND CONTROLS Rigid Seat (If equipped) (B) Adjusting reclining 3 - 68 (A) F ore-and-aft adjustment Move lever (1) to the upper, set the operator's sea t at the d esired positi on, then release the le Fore-and-aft adjustment: 50 REMA RK The s eat can be reclined mo re when the seat is pushed to the front. The a mount of reclining dec reases as the seat is p ushed ba ck, so when moving the seat back, return the seatback to the upright on. pright positi Pull up lever (2) and set the seat back to a en release the lever. position that is comfortable for operation, th Sit wit h your back against th e seat backrest when a djusting.
I f your back i s not against the back rest, the backrest may suddenly move forwa rd. (C) A djusting armrest angle spring up by hand approx. 90°. Armre st (3) can be made to spring up by hand approx In ad dition, by turning the di al (4) at bottom of armrest by ha nd it is possible to make fine verti cal adjustment of the armre st angle. 5°. Armre st adjustment angle: 2 REMA RK If the seat back is tipped to the front without raisin g th e arm rest (3 ), the armrest will rise auto (D) O verall fore-and-aft adju stment of seat Move lever (5) to right. After the seat is set to the d esired po sition, release the lever (5).
In this case, the operator's seat, left and right control le vers, and safety lock l ever all sli de togethe Fore-and-aft adjustment: 10 Rearview Mirrors Adjus t the angle of the mirro rs so that the area to the botto m rear of the operator's seat (the ar ea hidden by the engi ne hood) c an be seen clearly.