. OPERATION MACHINE OPERATIONS AND CONTROLS Seat Belt (If equipped) WARNING 3 - 70 Before fastening t he seat belt, check that there is n o problem in the securing brackets or belt. If ther e is any wear or damage, replace. Even if there appe ars to be no problem in the seat belt, replace the seat belt once every 3 years. Th e date of manufacture is woven on the reve rse side of the belt. Adjust and fasten the seat belt before operating th Always use the se at belt when operating the mach Do not use the se at belt with either half of the belt Check that the bol ts of the clamp securing the b elt to the chassis are n ot loose. Tighten the m if they are loose.
The tightening torq ue for the mounting bolt is 2 4.5 ± 4.9 N·m (2.5 ± 0.5 kgf·m, 18.1 ± 3.6 lbf If the belt surface i s scratched or frayed or if the fittings are broken or deformed, replace th Fastening and Rem oving t so that the operator still feels that there is 1. Adjust the sea sufficient knee seated, with th 2. After adjusting and tongue (2) (1). Pull on the in the buckle. 3. Depress the re . Adjust the sea is room when fully depressin g the pedal while backrest. e operator's back against the . After adjusting the seat position, sit in the se at. Grip buckle (1) in each hand and insert ton gue (2) into buckle belt to confirm that the tongue is securely locked .
Depress the re d button on buckle (1) to unfa sten the seat belt. Fasten belt along your body without kinking it. A djust the lengths of the belt on the tongue s