. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE ATTACHMENT COMBINATIONS WARNING 6 - 10 Depending on the type or combina tion of work equipment, th ere is danger that the work equipment may hit the cab or machine body When using unfam iliar work equip ment fo r the f irst time, chec k before starting i f there is a ny danger of interference, and operate with This table lists th e combination of bucket which can be installed to the standard arm and long arm. {: C U: C ¯: C an be used only for light duty work ed an be used only for light d annot be us NOTI CE W hen the long a rm is equipped, if the bucket is pulled in to t he machine body, the arm interferes with t he body.
Operate the long ar m carefully. m is fully lowered during oblique digging, the boom interferes with the undercarriage. Operate the boom W hen the boo refully. ca lique digging, boom interferes undercarriage. Opera Categories of us e ing: Digging or loading sand, gravel, clay etc. For general digg ing: Digging o r loading sa nd, gravel, c lay etc. For light duty dig ging: Digging or loading d ry, uncaked earth and sand, mud etc For loading work :
Loading dry, loose earth and sand Name Tooth mounting pin Capacity m3 (cu.yd) SAE/CECE Outside width (bucket body) mm (in) Outside width (side cutter) mm (in) Use Standard arm Long arm Narrow bucket Vertical ( 0.09/0.08 0.12/0.10) 350 (13.8) 450 (17.7) Narrow digging { { Narrow bucket Vertical ( 0.13/0.11 0.17/0.14) 450 (17.7) 550 (21.7) Narrow digging { { Narrow bucket Vertical ( 0.20/0.18 0.26/0.24) 550 (21.7) 650 (25.6) Narrow digging { { Standard bucket Vertical Horizontal ( 0.28/0.25 0.37/0.33) 650 (25.6) 750 (29.6) General digging { ± Light duty bucket Vertical ( 0.34/0.30 0.44/0.39) 760 (29.9) - Loading { ±