Lubrication and Service - Section 40 09/11 OM4054 Page 40-6 10 HOUR (DAILY) INSPECTION (continued) Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS 2. Air Cleaners Check air cleaner vacuum gauges. Clean or replace filter elements if restriction vacuum reaches 6 kPa (25 in. H O). Push the reset button on the face of the 2 gauge to return to zero. 3. Drive Belts a. Check the condition of the alternator and fan belts. Check for proper tension. b. Inspect belt alignment. 4.
Engine And Turbochargers Inspect for leaks, vibrations or odd noises. 5. Tires a. Check for proper inflation and wear. b. Inspect for embedded debris, cuts or other damage. 6 Windshield Wipers & Washer - Inspect the wiper blades for wear or damage. Replace if necessary. Check the windshield washer fluid level. If below 1/2 full, add fluid.