Lubrication and Service - Section 40 09/11 OM4054 Page 40-8 250 HOUR INSPECTION (continued) Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS 3 Alternator Belt - Check the alternator belt for cracks, cuts or glazing. Check for proper tension. Repair or adjust as necessary. 4 Air Conditioner Compressor Belt- Check the com- pressor belt for cracks, cuts or glazing. Check for proper tension. Repair or adjust as necessary. 5 Fan Belt - Check the fan belt for cracks, cuts or glaz- ing. Check for proper tension.
Repair or adjust as necessary. 6 Transmission Case Breathers - Remove breathers, and disassemble. Remove the filter element, and clean in solvent. Dry with pressurized air. Reassem- ble and reinstall. 7 Hydraulic Tank Breather - Remove breather, and dis- assemble. Remove the filter element and replace. Reassemble and reinstall. 8 Differential Case - Check the oil level. Lube key B. 9 Differential Case Breather - Remove breather. Clean the breather and reinstall. 10 Final Drive Case - Check the oil level in RH and LH case. Lube key B. 11 Parking Brake - Measure brake pads for proper wear and thickness. Refer to the service manual for limits and specifications. Lube key D.
12 Fuel Filters Remove and replace fuel filter elements. 13 Corrosion Resistors - Remove and replace corrosion resistor elements. 14 Dump Body Pads - Check the pads, shims and mounting hardware for wear and proper tightening.