Lubrication and Service - Section 40 09/11 OM4054 Page 40-12 2000 HOUR INSPECTION Perform the maintenance items for the 250, 500 and 1000 hour intervals at this time, also. Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS 1 Hydraulic Tank Oil - a. Drain the oil from the tank and refill. Capacity of the hydraulic tank is 576 l (152 gal). Refer to the lubrication chart for type of oil to use. Lube key C. b. Remove and clean hydraulic tank strainers. Refer to Hydraulic Tank Service in this chapter for proper filling instructions.
2 Front Wheel Hubs - Drain the hydraulic oil from each front wheel drain plug. Ensure the plugs are in the six o’clock position when draining. Drain the hydraulic tank prior to removing the drain plugs from the wheel hubs. 3 Final Drive - Position the machine so that the case casting line is horizontal and the drain plug is at the bottom. Drain the oil and reinstall the plug. Remove the fill plug at casting line and fill until oil reaches the plug hole. Service both final drives. Capacity is 120 l (32 gal) on each side. Lube key B. 4 Differential Case - Drain the oil from the differential. Refill until oil reaches the fill plug hole. Oil capacity is 300 l (79 gal). Lube key B.