Section 42 - Automatic Lubrication System OM4203 42-2 FIGURE 42-2. AUTOMATIC LUBRICATION SYSTEM INSTALLATION NOTE: The above illustration shows the standard location for the lube pump and reservoir (right platform). This assembly may be located on the left platform on some models. 1. L.H. Suspension, Bottom Bearing 2. L.H. Hoist Cylinder, Top Bearing 3. L.H. Hoist Cylinder, Bottom Bearing 4. L.H. Suspension, Top Bearing 5. L.H. Body Pivot Pin 6. R.H. Body Pivot Pin 7. R.H. Suspension, Top Bearing 8. Grease Supply From Pump 9. R.H. Suspension, Bottom Bearing 10. R.H. Hoist Cylinder, Top Bearing 11. R.H. Hoist Cylinder, Bottom Bearing 12. Rear Axle Pivot Pin 13. L.H. Anti-Sway Bar Bearing 14.
R.H. Anti-Sway Bar Bearing 15. Truck Frame 16. Vent Hose 17. Test Switch 18. Pressure Switch, N.O., 2500 psi (17 237 kPa) 19. Grease Pump 20. Vent Valve 21. Filter 22. Grease Supply to Injectors 23. Injectors 24. Pressure Switch, N.O., 2000 psi (13 790 kPa)