OPERATION 10. HOLD SWITCH The Hold switch, located on the lift lever, will maintain the transmission gear. When this switch is depressed, transmission indicator light on the main monitor panel will light. Depressing this switch again will release the transmission hold function and the indicator light will go off. The transmission hold feature is recomm ended to maintain travel speed (up and down slopes, grading, etc.). When the transmission hold function is engaged, the manual speed control lever can be used to change gears. 11. FRONT WIPER SWITCH Turn switch (A) to operate the front wiper. If button (B) is pressed, washer fluid will spray out on to the front glass. 1 2 .
REAR WIPER SWITCH Turn lever (C) to operate the rear wiper. 13. CIGARETTE LIGHTER This is used to light cigarettes. Its seven-amp receptacle also can power electric accessories. To use the lighter, push its knob in. After a few seconds it will spring back. At that time remove the lighter and light your cigarette. After the lighter has cooled, it can be removed and set aside. Electric current (seven amps) then is available at the lighter receptacle to power accessories. 2-18 WA320-3MC