F1 07/26/2007 AXLE AND DIFFERENTIAL OPERATION DESCRIPTION OPERATION NUMBER NPR W3/W4 N/W CREW NQR W4/W5 NRR W5500HD FRR WT5500 FTR FVR FXR HTR HVR HXR ANGULARITY, DRIVE LINE - CHECK AND CORRECT INC: D & C propeller shafts. F0020 0.5 0.5 0.5 0.5 0.5 1.3 2.3 BEARING, CENTER SUPPORT - REPLACE POLICY: K INC: D&C front and intermediate U-joints. R&R center bearing support to frame. R&R propeller shaft and hanger bearing to shaft. F0040 1.1 1.1 1.1 1.1 1.2 1 1.6 SLIP JOINT, PROPELLER SHAFT (BETWEEN TRANS & REAR DIFFERENTIAL)- REPLACE POLICY: K SPICER 1550 TYPE INC:D&C yoke. Install slip joint and lubricate F0060 - - - - 0.5 1 1 UNIVERSAL JOINT, PROPELLER SHAFT - REPLACE POLICY: K FRONT ADD:
A - W/Hanger Bearing B - To Replace Trans Companion Flange W/INTERNAL EXPANDING BRAKE REAR INTERMEDIATE Without Slip Joint F1002 F1003 F1006 1 - 0.2 1 1.1 - 1 - 0.2 1.1 - 1 - 0.2 1 1.1 - 1 - 0.2 1 1.1 - 1 - 0.2 1 - 0.7 1.2 - 0.2 1.2 1.5 - 1.2 - 0.2 1.2 1.5 - PROPELLER SHAFT, FRONT - REPLACE POLICY: K INC:D&C one U-joint and remove propeller shaft from slip joint Where hanger bearing is used, D&C front and intermediate U-joints. R&R hanger bearing support to frame and R&R hanger bearing to shaft. NOTE: This operation also to be used for single prop shaf units. ADD:
A - To Replace Trans Companion Flange F1200 1.1 0.3 1.1 0.3 1.1 0.3 1.1 0.3 1.1 0.4 1 0.4 1 - PROPELLER SHAFT, INTERMEDIATE - REPLACE POLICY: K F1220 1.2 1.2 1.2 1.2 1.2 1.2 1.4