www.changlin.com.cn 16 mm Remove the turbocharger oil supply line from the oil filter head. 10 mm Remove the oil cooler cover, element and gaskets. NOTE: The element will contain approximately 0.7 Liters [0.75 U.S. Qts.] of lubricating oil which will drain when the cooler is removed from the engine. Clean the oil cooler sealing surfaces. 10 mm Assemble the lubricating oil cooler gasket, element, cooler cover gasket, lubricating oil thermostat and oil cooler cover to the cylinder block. Install the filter head and gasket if removed. NOTE: Be sure to remove the shipping plugs from the new cooler element.
131 / 149 pages ubricating Oil Cooler 24N • m 18 ft-lb over Capscrews ubricating Oil Filter Head 24N • m 18 ft-lb apscrews