www.changlin.com.cn NOTE: Be sure to open the engine and aftercooler vents to allow air to escape as the system is filled. Refer to Section 7. Fill the coolant system and operate the engine to check for leaks. Stop the engine and check the coolant and lubricating oil level. Electrical System Repair Summary WARNING Batteries can emit explosive gas. Ventilate area before working on around battery. Keep flame, cigarettes, pilot lights, sparks, wiring switches, equipment, and other ignition sources away. Remove negative (-) cable first and attach it last. 132 / 149 pages 16 mm Connect the turbocharger oil supply line. Torque Value: 15N.m [11 ft-lb] Install a new lubricating oil filter.
Follow the manufacturer's instructions for tightening. 16 mm Connect the turbocharger oil supply line. Torque Value: 15N.m [11 ft-lb] omponent To Be Replaced Tools Preparatory Steps tarting Motor Ratchet, 16 mm Socket, Disconnect ground cable to battery. lternator Ratchet, 8 mm, 13 mm and 17 mm Disconnect ground cable to battery and remove drive belt. Socket and Torque Wrench, 1/2 inch Square Drive Breaker Bar