OM3017.2 Operation - Section 3 Operator Cab and Controls Page 3-15 STANDARD OPERATOR SEAT The operator’s seat provides a fully adjustable cush- ioned ride for the driver’s comfort and ease of opera- tion. The seat is independently mounted from the cab for easy maintenance and repair. Adjustment The following adjustments must be made while sitting in the seat. 1. To adjust fore/aft location of seat: a. Raise adjustment lever "Lift to Slide" (2, Figure 3-5). b. Move seat backward or forward as desired. 2. To adjust seat height: a. Depress the "Height Adj. Push" lever (1). b. Adjust seat assembly to desired height. 3. To adjust weight: a. Turn knob "Weight Adjust" (3). b.
Moving knob clockwise decreases cushioning effect of seat and turning counterclockwise in- creases cushioning effect. c. Proper adjustment results in Weight Indicator (4) being flush with seat base while operator is seated. 4. To adjust seat cushion: a. Raise "Cushion Tilt Latch" lever (5) on left side of seat. b. When lever is unlatched, choose between two different positions. FIGURE 3-5. SEAT ADJUSTMENT CONTROLS 1. Height Adjustment 4. Weight Indicator 2. Slide Adjustment 5. Cushion Tilt Latch 3. Weight Adjustment