3.3.33. Fuel filter z Assemble the fuel filter to the intake z As for the replacement method of fuel stake by tightening bolts. filter element, loosen the fixing bolts of upper parts, and assemble the element with O-ring that must necessarily be a new one. 3.3.34. Alternator z Assemble the alternator bracket to the lower part of cylinder block by tightening the fixing bolts. z Install the alternator supporting plate. z Connect the crankshaft and the alternator and water pump pulleys with V-belts by inserting them into the respective pulleys. z Adjust the alternator support nut until the belt tension can be 10 mm ~ 15 mm by pushing with thumb. 3.3.35. Idle pulley z Install the idle pulley.
z Connect the water pump, the crank and the idle pulleys with driving V-belts. z Tighten eye bolt and nut. (10 mm ~ 15 mm or so pushing with a thumb) Engine Reassembly - 97 - FM2002I Adjust bolt EA6M2007