z Remove the flywheel ring gear. Heat the ring gear evenly with a gas volumetric expansion. burner (up to 200 ° C) to invite Tapping around the edges of the ring gear with a hammer and brass bar to remove it. CAUTION : Do not damage the flywheel. EA0M4028 3.1.29. Flywheel housing z Remove the flywheel housing fixing bolts and take them out. z Remove the oil seal from the flywheel housing. 3.1.30. Crankshaft z Remove the bolts from bearing caps. z Remove the main bearing cap fixing bolts in the order of assembling. (Remove them in /the same way of the cylinder head bolts.) z Maintain the removed bearing caps in the order of cylinders.
z Temporarily install the bolts at the both side of crankshaft, and lift the shaft with EFM2029I a rope. NOTE : Do not mingle with the metal bearings and bearing caps randomly. To prevent mixing, temporarily assemble the metal bearings to the corresponding bearing caps in turn. Engine Disassembly - 60 -