3.3.14. Front oil seal holder z After placing the oil seal in the oil holder hole properly, press it in with a mandrel. (Be careful for oil seal not be damaged.) z Attach the gasket at oil seal holder. z Align the dowel pin with the oil seal holder dowel hole and assemble them by tapping lightly the dowel pin part with an urethane hammer. When in EFM2073I assembling, take care not to hurt the oil seal by the crankshaft. NOTE : Without coating the oil seal with oil or lubricant, assemble it in the dry state. z Tighten the fixing bolts in the zigzag method. 3.3.15. Vibration damper z Assemble the vibration damper tightening firstly by the crankshaft pulley and the fixing bolts.
z Insert the crankshaft pulley assembly to the crankshaft and tighten the fixing bolts in the method of zigzag to the specified torque. EFM2092I Engine Reassembly - 88 - Torque 20 kg⋅m